What to Expect from Asphalt Sealcoating Contractors in NY: A Step-by-Step Process
nwssealcoating
If you hire professional asphalt sealcoating contractors, your road or parking lot will be safe and last longer. Sealcoating protects weather, chemicals, and normal wear and tear from damaging the surface. You can plan better and get better results if you know what to expect from asphalt seal coating contractors in NY.
Step 1: The first inspection and evaluation
The first thing you need to do is carefully check your ground. Before seal coating, contractors look at the surface to see if it needs any fixes. What do they look for?
Cracks and holes
Chemical or oil spots
Issues with drainage
If extensive repairs need to be done, they are planned for before the sealcoat is put on.
Step 2: Clean the outside
Contractors clean the tarmac surface very well before putting on the sealant. This step is crucial for the sealer to stick well. What cleaning includes:
Clean up by sweeping and removing leaves, dirt, and other junk.
To get rid of spots and residue, power wash.
Using degreasers to scrub oil spots
If the surface is clean, the seal coat will stick well and cover for a long time.
Step 3: Filling in cracks and fixing things
Cracks let water get into the asphalt, which damages it even more. Contractors fill the cracks with hot or cold crack filler to make the surface smooth and watertight. It is fixed before the sealcoating starts if holes or other significant damage are found.
Step 4: Put on the seal coat
After the surface is ready, the sealant is put on in one or two coats, depending on the state of the pavement. This is what most people use to seal coats:
Large-scale spray systems
For more accurate jobs, squeegee machines
Since the sealant needs warm, dry weather to set, summer is the best time to do this.
Step 5: Allow time to cure and dry
The surface has to cure after the sealcoat is put on before it can be used. Most workers say that the area should be closed off for at least 24 to 48 hours so that the sealant has time to dry and stick to the asphalt.
Step 6: Add line strips and any other finishing touches
If the area being sealed has a parking lot, the lines, signs, and other markings are painted over after the sealant has dried. New line markings make the road safer and make it look more professional.
Step 7: Final Check and Suggestions
When the job is done, contractors do one last check to make sure the sealcoat was put on properly and that no spots were missed. They may also give you advice on how to keep it in good shape, like cleaning it regularly, closing cracks, and applying more sealcoat every two to three years.
Applying a protected layer is only part of the seal coating process. It also needs to be properly prepared, fixed, and done with great care. Asphalt sealcoating contractors in New York get good results that make your pavement last longer, look better, and be safer by following a structured method. If property owners know what to do at each step, they can protect their investment and enjoy smooth, well-kept floors for many years to come.
